How To Change A Tire On A Rim With A Machine. Place the rim on the tire machine. Secure the wheel wedges behind the good tyres to ensure additional safety.
If you’re changing a rear tire, place these in front of the front tires. Our wheel size calculator is the most comprehensive tire comparison tool suitable for passenger cars, suvs, and vans. Place the jack under the frame near the tire that you are going to change.
Once Tire Pressure Is Indicated On The Air Gauge (Inflation Pedal In Position 1;
There should be a changing rod that comes with your tire changing machine but any regular metal tube with a pointed end will do. 2) place tire at the base of the tire changer underneath the lever action arm. Tighten the lug nuts by turning them clockwise with a lug wrench.
Brake The Tire Bead From The Rim Using The Tire Changing Rod.
Rabaconda manual tire changer machine. Foot removed from pedal), continue to inject air into the tire in short intervals. Place the rim on the tire machine.
Take The Spare Wheel And Necessary Tools Out Of The Boot.
We will also diagnose potential causes of. Check to make sure that the tyre and the wheel rim are of same size before mounting the tyre. Wait until you have finished tightening the lug nuts with a lug wrench or breaker bar to ensure the new tire is secure.
Place The Iron Top Of The Rim And Under The Tire And By Using Them, Create A Gap Between The Tire And The Rim.
Place the jack under the frame near the tire that you are going to change. The tire machine is designed to accept the rim facing up. The customer buys a new set of tires and hands over the keys, waits quietly while the tires are installed, settles the bill and leaves.
4) Apply A Downward Pressure To Move Tooth Down So That The Tire Moves Down Off The Bead Of The Rim.
Take out the spare tire and the jack. Secure the wheel wedges behind the good tyres to ensure additional safety. For the other side tyre demounting, keep using the lifting lever to lift the tyre, make the other side tyre separated from the wheel rim.