How To Light A Pellet Stove. It's important to ensure that your would pellet stove is clean. Switch off the drill when you observe a nice measure of pellet in the consume pot to fire.
Light the igniter and switch the blower on. Switch off the drill when you observe a nice measure of pellet in the consume pot to fire. Pour pellets into the stove’s hopper.
Fill The Stove's Hopper With Wood Pellets.
At this point i turn the stove on with the door cracked, the door open switch should not allow pellet fed but the exhaust blower would be running , this allows the smoke. How to light manually igniting pellet stove you have to fill the burn pot with some pellets. Wait as the pellets automatically go into the burn pot.
Depending On Your Model, An Ignitor Rod, A Hot Surface Ignitor Or Glow Plug.
Pour pellets into the stove’s hopper. Turn on the blower fan. I now do it this way:
Turn On The Auger And Allow The Pellets To Feed Automatically In The Burn Pot From The Hopper.
Most models have an automatic ignition system designed into a circuit board. How does my pellet stove light? Wait for few minutes until the edges of the pellets become red.