How To Open Electric Garage Door Without Power. You should notice an emergency release handle or bypass cord. When you open a garage door by hand, make sure to stay safe.
Pull out the lock tumbler. This is where you will find a small lock that stores an emergency release cable. Tug at the emergency release cord.
Table of Contents
Locate The Emergency Release Kit.
Pull the manual release cord. Make sure to pull the emergency release cord in a downward motion. Before you even have access to your garage from the outside, your garage door should be equipped with an emergency key release.
Disengage The Motor Of The Garage Door By Pulling The Cord.
When you open a garage door by hand, make sure to stay safe. Look for a cord in the lock tumbler hole. This is where you will find a small lock that stores an emergency release cable.
Several Occasions May Arise Where You Might End Up With A Garage Door That Will Require A Manual Operation.
Pulling the emergency cord will disable the trolley operator which usually moves your garage door. Find the emergency key release that’s been installed on your garage door. Utilize the lifting handle installed in the bottom panel.
Find The Lifting Handle To Open The Door And Then Lift It Up.
Almost all garage doors feature a manual release function to bypass the opening mechanism during power outages or in case the motor malfunctions or a garage door remote breaks. First of all, be aware not to exert too much force in your garage door. The automatic operation of your garage opener can work as long as your power is out without any repercussions.
Unplug The Automatic Door Opener:
Once the power is restored and you once again want to take advantage of the convenience of the automatic garage. Make sure the door is closed. When the trolley is disconnected, take the time to slide it back an inch or so, away from the door.