How To Test Sump Pump Check Valve. A check valve on the discharge line keeps water in the pipe from flowing back into the sump pit when the pump switches off. If you have a sump pump in the basement, a check valve is probably located in the discharge line of the pump.
Check for leaky or moisture on seals, connections and valve. Our pump expert explains what check valves are, which ones are the best, and why you should use them when installing a ne. In sewage systems, these valves are generally required by code to prevent sewage from draining back into the basin.
Inside Of A Sump Pump, There Is A Propeller That Makes Sure That Water Goes In One.
Fill the put 1/4 to 1/2 with water and see if it drains. If the water level is low, chances are good the pump is. The primary way to test a sump pump for power is by tracing the two electrical cords.
Most Of The Time, These Product Use What Is Called A Swing.
We proudly serve massachusetts, rhode island, new hampshire, vermont, connecticut, new york, new jersey, maryland, washington dc, michigan, georgia, oregon among others. Regardless, your sump pump moves water from where it is to where you want it. First, reinstall your sump pump by placing it back into the sump pit and reconnecting it to the discharge line;
Remove A Section Of The Pipe That Is About The Same Length As The Valve.
Once you unplug the unit completely and plug it back in you should hear noise from the unit, whether it’s a gurgle type sound or vibration of the unit as it turns back on. Make sure all connections and clamps are tight. Lift the pump out and hold it over a trash can.
The Check Valve Prevents Backflow Into Your Sump Pump, Which Is Another Way Of Saying It Prevents.
In such cases, you’ll need to add another sump pump. If you have a sump pump in the basement, a check valve is probably located in the discharge line of the pump. Check for leaky or moisture on seals, connections and valve.
Once Your Sump Pump, Sump Pit, Discharge Line, And Discharge Outlet Are Clear And Free From Debris Or Clogs, You Can Get Started With The Actual Testing Process.
The pump cord plugs into the back of the float cord plug. In sewage systems, these valves are generally required by code to prevent sewage from draining back into the basin. If you notice signs of check valve failure in your sump pump, contact the sump pump geeks right away!